News
- Details
- Written by: Maintenance Guy
- Category: News
- Hits: 491
A couple of requests please.
Firstly, I'm after an 'Instagram account manager' for MSARS. We already have a Facebook page, which basically looks after itself, a Twitter feed, which I run, and a YouTube channel where I post any original videos I come across. What we don't have, and what I'd really like to add is an Instagram feed.
More importantly, I'd appreciate it if one of our members was prepared to step up and 'run' it for us. I just don't think I can take on another feed. I want it purely to cover all the bases in terms of publicity.
All it would entail is for someone to set up an account and 'brand' it as the MSARS Instagram feed, and then post one or two photos to it each month or so. Nothing more and nothing less. I'll link to it in our Social Media menu here on the website, and that'll be it. It'll be up to the account manager to source (preferably take) original photos to which the club can claim the rights, and post them with whatever supporting tag-line is appropriate. I don't really care what it is, as long as it relates to our hobby and is of interest. Theme it however you want. Go crazy. Put your own spin on it.
Please have a think if it's something you could do. There will be no pressure or expectation - we don't work like that. Anything is a bonus.
Secondly, we have a handful of new members who'd like to join our Sunday morning 2m net, but it's so poorly supported by MSARS members, it's a bit of a joke. Surely we can get a few of us on there each week. It's an ideal place to introduce beginners with handhelds and basic antennas.
Let's start tomorrow! No time like the present. 2m simplex is SO much nicer than HY. If a few people can be bothered, Uncle Phil may have a surprise for you. I might even have a surprise for you!
Come on people. How about it?
Berni M0XYF
Update
I didn't post this article until fairly late last night (Saturday), but Adrian M0TCD read it and pitched up for the VHF net this morning, and it was great to hear him on. Unfortunately, he had to dash off to fix a water leak at home towards the end, so I hope that was on the 'dripping-tap' end of the leakage scale and not the 'floating-furniture' end!
Four of us on this morning, and it was a bit of a laugh. Myself, Phil M5BTB standing in for Russell G7TMR in the chair, and Terry M0TPJ - another regular Sunday morning participant.
Right, that was a good start. How many can we get on next week? Dust off your 2m rigs ladies and gentlemen, and let's hear you on the radio.
- Details
- Written by: Maintenance Guy
- Category: News
- Hits: 376
I would like to place on record my thanks to Stella Rogers for a couple of the less well publicised things that she has done recently which help to maintain and support our society.
Firstly, I know that Stella has recently managed to have our contact details updated on the RSGB website. Now this may seem on the face of it to be a trivial thing, but trust me, it was not.
Stella has also taken it upon herself to send our monthly event schedule to the RSGB for publication in Radcom, which is all great publicity for MSARS.
Well done.
And now for a personal view of mine.
Not so 'well done' to the Radio Society of Great Britain.
Whilst I understand that the RSGB is not the most wealthy organisation in the world, and that it is partly staffed and supported by many hard-working volunteers, it is simply unacceptable for our national society, to whom we pay a not insignificant annual fee from our meagre club funds, to take nearly EIGHT MONTHS to update our contact details on their website. I should tell you that Stella's dogged persistence has saved the RSGB board of directors from a proper email-lambasting from me personally (as a fully paid up RSGB member) for the inexcusable delay in achieving this simple administrative task. I expect an awful lot more from them.
While I'm at it, I'd also like to say that our local (not regional) RSGB representative was about as much use as a chocolate fireguard in getting our details updated. Not good enough, volunteer or otherwise.
Berni M0XYF
- Details
- Written by: Maintenance Guy
- Category: News
- Hits: 410
On Monday, February 6, 2023, Anthony Luscre, K8ZT will present on the topic of QRP operating during the RSGB's Tonight @ 8 webinar. This is a great opportunity to learn more about this aspect of amateur radio and ask any questions you may have. The webinar will be streamed live on the Society's YouTube channel and their special BATC channel, so be sure to mark the date in your diary and tune in for another informative and engaging presentation.
If you're interested in joining the webinar, visit the Society's website for more information. You'll be able to watch the presentation live and interact with Anthony Luscre and other attendees in real-time. This is a great chance to deepen your knowledge of QRP operating and connect with other enthusiasts in the field. Don't miss out on this exciting event.
This article has been written by the ChatGPT artificial intelligence 'robot', and has subsequently been checked and edited by:
Berni M0XYF
- Details
- Written by: Maintenance Guy
- Category: News
- Hits: 487
Sorry about the title of this article. Some of us are in our 50's you know 😛
Just a quick update on our progress on Thursday morning at the clubhouse, for those that haven't heard via the nets over the last couple of days.
Aerialbeam were once again in attendance and did all the scary ladder-based antics, while some of us were faffing with the antenna itself trying to find a definitive fault that we could attribute the recent problems to.
It's had a rough time up there, and we found a few things. Fortunately, the coax itself didn't reveal any further teeth marks or similar damage, so I don't know what that was all about. That would have been bad news. We found that the PL259 at the impedance transformer was hanging on by a thread, and the counterpoise fell off as we were lowering it, so we beefed both of those things up. I can only think that the plug has been stressed by having the coax taped to the supporting mast with zero slack before the strain-relief loop was added during the last maintenance operation, and that nobody noticed. Who knows? No point speculating, but it looks good until the next problem!
More self-amalgamating tape was applied, and as we didn't have any silicon grease available, Stella donated her lip-balm stick in a fetching shade of pink to help in the anti-corrosion battle.
We also found a discernible amount of water inside the transformer. Only a few drops, but not ideal. That's what happens when you drill holes in an IP65 enclosure. I like the small pressure compensation valves below in dealing with this problem (my enclosures are all bone-dry)...
but we didn't have any to hand, and I think that Phil G4UDU is toying with the idea of potting the whole thing up the next time around (and there will be a next time). I've never seen this done on one of these fairly hefty 2.4" toroid-based transformers, so that will be interesting. We settled for putting a tiny drain hole in the bottom of the box (I think - I didn't see it actually happen).
Ultimately, we ran out of time before the rigger had to be on another job, so although we had to drop the coil-end of the element to give us enough slack to lower the transformer at the other end to head-height, we didn't have time to trim that extension. We should be able to do this ourselves at a later date, as it's tied-off only just out of reach.
Phil also took away the external antenna relay with a view to either modifying it, or replacing it with an upgraded version. I think he wants to test it with 100+ Watts through it to make sure it'll stand up to my evil data transmissions. Consequently, the 'antenna' virtual switch on the eWeLink app does nothing, so anyone with access to the app should just leave this switched to the 'off' position for now.
Thanks to our friends at Aerialbeam once again. You do us proud. Thanks also go to attendees Chris G4ZCS, Mike G8KMP, Merv M0WVE, Stella M6ZRJ, Alan G8YKV and Phil G4UDU, who not only spends a lot of time supporting the club, but also donates a fair amount of hardware out of his own spare-parts bins without anyone even realising.
Well, that's all she wrote. 'Till next time,
Berni M0XYF
- Details
- Written by: Maintenance Guy
- Category: News
- Hits: 427
You may well ask!
So, everything became unexpectedly Tom & Dick after the last club night's rushed attempt to choke-off some perceived RF in the club shack. The diagnosis was subjective, but not unreasonable and likely correct to some degree, but after a handful of us attended the 'bunker' this morning, we discovered that there was more to it than a waft of Radio Frequency where it wasn't welcome.
Frankly, it's been a right dog's dinner in there since the major antenna work took place in the autumn, with no-one able to commit the time to straighten it out in a calm and logical manner like you would do in your own shack, but this morning we were determined to put that right.
Disappointingly, no-one thought to bring any breakfast, but I guess that just made us more motivated to get it finished, and after three hours, we were out of there.
Other than some serious tidying up and cable re-routing, I managed to re-house the KiwiSDR in its own plastic box (thanks to my local Chinese take-away) whilst Merv was rather insistent on wrapping it in aluminium foil - which would have looked much better in gold 😝 - but should help with shielding. I also re-soldered a nice BNC plug on the coax coming from the antenna in place of the ropey PL259 which was decidedly suspect and candidate #1 for the intermittent issues we've been having, to my mind. We also found a new home for everything up on the shelf, along with the WiFi access point/switch. I also stuck the RF protection unit and Wellbrook pre-amp together with some double-sided tape to help tame the writhing snake pit of mini-8 coax. I just need to make up a nice short link-cable to refine the job at my leisure.
Meanwhile, over in the Flex corner, Phil was doing battle with the rather odd problems on transmit. This seems to have got worse over the last few weeks, and wasn't resolved by the rooftop remedial work that was attempted a little while ago. A lot of diagnostic work and plenty of on-air testing determined that the radio was fine, and after cutting and re-soldering the coax plug a number of times, due in part to the discovery of some strange looking teeth-like marks in the coax (very odd, but now removed) it was decided to perform a continuity test on the antenna/coax.
This showed up an unexpected 62Ω resistance (should be very close to zero), indicating that there is something amiss with the antenna itself.
Unfortunately, this will entail another rooftop excursion to determine exactly what's going on. Phil will make sure he's in attendance when this happens, as he built it in the first instance and is best placed to see what's failed. Whilst this might be regarded as bad news, it's actually good to know that we found something wrong and can therefore fix it. Assuming we can also prevent a reoccurrence, it's got to be a positive result.
Between now and then, the Flex is only really useable on Rx, whilst the Kiwi is back in action and available via the Homepage banner once again.
Your friendly local news reporter, on the scene in Burgess Hill.
Berni M0XYF
